Kunz MR44B Bedienungsanleitung PDF herunterladen (Seite 9)

Figure 6: ATV Tongue Assembly

OPERATIONS AND ADJUSTMENTS

Wire Lock Section of

Wire Lock Pin

(Placed Back From

Direction of

5/16” Wire

Direction of Travel Screw Pin Shackle

Clevis

Tongue

Shift Tongue Left or Right

Between Holes

Lock Pins

Travel)

f Follow

nstructions to avoid personal injury and/or property damage.

WARNING: Do not allow anyone to operate this equipment who has not fully read and

WARNING: Operator should be familiar with all functions of the unit.

. TONGUE CONFIGURATIONS AND ADJUSTMENTS

WARNING: Shut off the engine and allow the mower blades to come to a complete stop

The hitching system is designed so that the rough cut mower can be pulled directly behind a tow

When pulling the mower directly behind, the hitch pivot should be fastened on the right

This sa

these i

ety alert symbol is used to indicate safety instructions.

Read and follow all instructions in this manual and the attached engine

manual.

comprehended the safety manual and who has not been properly trained in the safe

operation of the equipment.

before adjusting the tongue.

vehicle or offset to the left or right. See Figure 7.

Note:

carrier arm for maximum maneuverability. See Figure 5. When pulling the mower in

the offset position the hitch pivot can be fastened on either the right or left carrier arm.

See Figure 5.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

Keine Kommentare

Kunz MR44B Bedienungsanleitung Seite 9