Kunz MR44B Bedienungsanleitung PDF herunterladen (Seite 10)

The tongue is equipped with a screw pin shackle clevis to provide movement in all directions on

Figure 7: Rough Cut Tow Behind Towing Suggestions

rough uneven ground. To prevent loss of the screw pin due to vibration or debris, place the screw

pin through the tow vehicle hitch and clevis and turn the screw pin until snug.

The tongue is designed to adjust from left to right within the hitch pivot. This allows the mowers

position to be varied behind the tow vehicle. This is accomplished by pulling the 5/16” wire lock

pins out and choosing two other hole locations on the tongue. See Figure 6.

OffsetDirectly Behind

ADJUSTING CUTTING HEIGHT

WARNING: Shut off the engine and allow the mower blades to come to a complete stop

before adjusting the cutting height.

Lower Edge of

Deck

Mower

Blade

Adjustment Crank: Roughly 8

turns e

Measure This Distance

Height

and Add 1-5/16” to get

Cutting

Cutting Height

1-5/16”

Smooth

Surface

uals 1.0”

Figure 8: Adjusting Rough Cut Mower Cutting Height

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Keine Kommentare

Kunz MR44B Bedienungsanleitung Seite 10