Kunz MR44B Bedienungsanleitung PDF herunterladen (Seite 5)

ASSEMBLY INSTRUCTIONS

Read the complete assembly instructions before starting the assembly.

You should have:

- one mower deck assembly

- two carrier arm assemblies

- two rear tire assemblies

- one front cross brace tube and one rear cross brace tube with height adjust assy.

- one ATV tongue assembly

A. ASSEMBLY OF REAR WHEELS AND CARRIER ARMS

1. Set the mower deck assembly on wood blocks so that it is suspended off the ground.

Note: The operator controls are on the front of the deck. (Left and right are determined by

looking in the direction of travel or by standing at the rear of the deck assembly looking

forward.)

2. Install the rear tire assemblies on the carrier arm assemblies. Remove the hex nut and lock

washer from the rear tire assembly and install the 5/8”x7-1/2” tire axle bolt through the hole in

the carrier arm assembly. See figure 1. Secure assembly with the lock washer and hex nut

provided on the rear tire assembly. The rear tires should be offset to the outside of the deck

assembly on both sides. See figure 2.

Figure 1: Rear Tire Assembly Installation

Flat Washer

Rear Tire

ier Arm

mbly

Carr

Asse

Hex Nut and

Lock Washer

Cup Washer

Bolt

1 2 3 4 5 6 7 8 9 10 ... 22 23

Keine Kommentare

Kunz MR44B Bedienungsanleitung Seite 5